The thinnest equipment on the plug. Description of tackle. Fishing technique. Advantages and disadvantages of the plug.
Features of fishing with a plug
In addition to the classic version, familiar to all anglers and called the “Aksakovskaya ouda”, a fishing rod has several more complex modifications, which include flywheel, Bologna, and match fishing rods. But no other modification of the float goes to any comparison - a plug rod. Everything here is unusual and original. And most importantly, the basic principle of the float and the method of delivery of the nozzle to the fishing point is missing - casting. The plug works by extending the long carbon fiber rod to the full length, where the fishing line with the equipment drops vertically down directly from the tip of the rod. And this method allows you to deliver at a decent distance from the coast to 17.5 meters the lightest equipment with the thinnest fishing line of 0.06 mm and a miniature float, which is not available for any other float equipment. Therefore, plug fishing is considered true sport fishing. In addition, the plug-in tackle allows each time with unchanging accuracy to lower the nozzle at one and the same fishing point, also baited accurately. After all, bait in this fishing can be thrown in the form of rolled balls, as in any fishing, and already aiming - with the help of a special container-cup that extends onto the rod, and then capsizes and dumps the bait in the selected place. For a plug rod, despite the large length, hanging branches of trees on the shore are not an obstacle, because casting is not required.
Fishing in the summer often freezes during the heat and other weather disturbances, but it is the plug tackle that can provoke sluggish fish to bite, since it does not frighten fish with bored casts and fishing can occur on the finest equipment, which is a positive factor for well-fed and careful fish during this period. . But why then the plug gear is not as massive as, for example, a fly fishing rod or a Bologna fishing rod "> A rod for fishing with a plug consists of a butt part or a main rod, which is assembled from carbon pipes about 1.5 meters long. The working end rod - trailer or whale - usually consists of 3-4 knees, often telescopic, this is simply a short light fishing rod with a snap, which is inserted into the butt part, and then the rod is rolled out to the full length, leaving the retractable roller, and the snap is carefully lowered into the water The equipment is no different from the fly. The float is also often fly. The bait is also used from a number of well-known baits. But the thinnest equipment, as already mentioned, can only be used on the plug. But how is it possible to bring large fish to thin gear? As in the fly a fishing rod, here in the rod, or rather, a rubber shock absorber is built into the whale. It also dampens fish jerks. Shock absorbers are in the plug of 20 numbers, and each serves to catch a fish of a certain weight. The thinnest shock absorber No. 1-4 is mounted in the last upper knee, and more powerful rubber is installed in the three legs of the whale. Rubber is fixed with a cone stopper. Just like in a fly fishing rod, the shock absorber is connected to the main fishing line with a connector and fishing is done on ready-made equipment. They are most often located on spare whales, which are always at hand with the angler on racks, tables or directly on the platform. The set of snap-ins should include the smallest hooks for sticking, and bream snap-in more powerful parameters.
Despite the cost of plug rods and equipment, some difficulty in mastering fishing techniques, lately there are more and more adherents of fishing on the plug.